saw filters for infrastructure systems series/type: b3606 the following products presented in this data sheet are being withdrawn. ordering code substitute product date of withdrawal deadline last orders last shipments b39141b3606z510 b39141b5211z510 2011-04-01 2011-06-30 2011-09-30 for further information please contact your nearest epcos sales office, which will also support you in selecting a suitable substitute. the addresses of our worldwide sales network are presented at www.epcos.com/sales.
2 may 09, 2001 saw components b3606 140,00 mhz low-loss filter data sheet ceramic package qcc 12 features l high performance if bandpass filter l constant group delay l hermetically sealed ceramic package terminals l gold plated dimensions in mm, approx. weight 0,4 g pin configuration 11 input or balanced input 1 input - ground or balanced input 5 output or balanced output 7 output - ground or bal. output 2, 6, 8, 12 case ground 3, 4, 9, 10 ground note: input and output port can be mixed up e lectrostatic s ensitive d evice ( esd ) type ordering code marking and package according to packing according to b3606 B39141-B3606-Z510 c61157-a7-a55 f61074-v8026-z000 maximum ratings operable temperature range t C 40/+ 85 ?c storage temperature range t stg C 55/+ 125 ?c dc voltage v dc 0v source power p s 10 dbm source impedance 50 w
3 may 09, 2001 saw components b3606 140,00 mhz low-loss filter data sheet characteristics operating temperature: t = -40?c ... 85?c terminating source impedance: z s =50 w and matching circuit terminating load impedance: z l =50 w and matching circuit tti=triple transit signal included; tte=triple transit signal excluded min. typ. max. center frequency f c 139,75 140,00 140,25 mhz (center between 6db points; @ t = 25?c) insertion attenuation at f c a c 11,0 13,0 db amplitude ripple (tti, p-p) da 130,0 ... 150,0 mhz 0,6 0,9 db pass bandwidth a rel 3db b 3db 25,5 mhz phase ripple (tte, p-p) dj 130,0 ... 150,0 mhz 8,0 9,5 ? 131,0 ... 149,0 mhz 6,0 7,0 ? relative attenuation (relative to a c ) a rel 100,0 ... 108,0 mhz 40,0 50,0 db 108,0 ... 116,0 mhz 40,0 48,0 db 116,0 ... 121,5 mhz 40,0 44,0 db 158,5 ... 164,0 mhz 37,0 40,0 db 164,0 ... 172,0 mhz 39,0 42,0 db 172,0 ... 180,0 mhz 40,0 47,0 db reflected wave signal suppression 0,72 m s ... 0,62 m s before main pulse 45,0 50,0 db reflected wave signal suppression 0,62 m s ... 2,88 m s after main pulse 33,0 37,0 db group delay at f c t c 0,71 0,72 0,73 m s group delay ripple (tte, p-p) dt 130,0 ... 150,0 mhz 15,0 ns temperature coefficient of frequency tc f C 87 ppm/k
4 may 09, 2001 saw components b3606 140,00 mhz low-loss filter data sheet matching circuit: unbalanced - unbalanced matching circuit: balanced - balanced note: component values depend on pcb layout. lp1 lp2 1:1 1:1 l p1 =47nh l s2 =10nh l s3 =10nh l p4 =47nh l p1 =62nh l p2 =62nh
5 may 09, 2001 saw components b3606 140,00 mhz low-loss filter data sheet normalized frequency response (triple transit signal excluded) normalized frequency response (triple transit signal included)
6 may 09, 2001 saw components b3606 140,00 mhz low-loss filter data sheet normalized frequency response (triple transit signal excluded) normalized frequency response (triple transit signal included)
7 may 09, 2001 saw components b3606 140,00 mhz low-loss filter data sheet normalized time response
8 may 09, 2001 saw components b3606 140,00 mhz low-loss filter data sheet attachment 1) pyroelectric pulse amplitude < 50 mv.
9 may 09, 2001 saw components b3606 140,00 mhz low-loss filter data sheet published by epcos ag surface acoustic wave components division, saw mc is pd p.o. box 80 17 09, d-81617 mnchen ? epcos ag 2001. all rights reserved. a s far as patents or other rights of third parties are concerned, liability is only assumed for compo- nents per se, not for applications, processes and circuits implemented within components or assemblies. t he information describes the type of component and shall not be considered as assured characteristics. t erms of delivery and rights to change design reserved. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
|
